Giải pháp

- Earth resistance measurement for multi-grounded systems

- Measure leak current with absolute certainty with highly sensitive 0.01 mA resolution (at 20.00 mA range)

- Measure load current up to 60.0 A range

- Clamp at the narrowest point

- Top “primary supply level” safety class rating for voltage detectors

- CAT IV 1000 V design meets CE Mark qualifications

- Continuously indicate battery status with green indicator lamp

- Both visual and audible voltage detection indication

- Automatic power switching prevents battery discharge

- World’s first non-metallic contact voltage detection and testing

- Simply clip onto wire insulation

- Phase detection check and line-to-line voltage inspection at the same time

- Easy and intuitive phase detection check with backlight and buzzer

- Ideal for work certification photos, offering simultaneous display of phase sequence and 3-phase voltage

Dòng sản phẩm đồng hộ vạn năng 3 1/2 Digit. Có độ chính xác cao, dải đo rộng với tất cả các tính năng cần thiết để thực hiện trong các ứng dụng đo điện phức tạp. 

- Đo điện áp DC: 600.000 mV ~ 1000.0 V, 5 ranges, Basic accuracy: ±0.3 % rdg. ±3 dgt.

- Đo điện áp AC: 6.000 V ~ 1000.0 V, 4 ranges, Frequency characteristics: 40 Hz - 1 kHz.  Basic accuracy 40 - 500 Hz : ±0.9 % rdg. ±3 dgt. (True RMS, crest factor 3)

- Induction heating technology

- Power assist function for more efficient heat supply

- No calibration is required.

- High powered 150W soldering iron with high heat capacity 

- Best suited for soldering of power-supply boards, heat sinks and shield cases

- Applicable for multilayer boards with micro components, selectable soldering iron for N₂ system

- A new generation high performance soldering station

- Adjustment mode, preset mode, and password function as a standard

- Selectable soldering iron for N₂ system 

- Dual port soldering station

- Allows 2 hand pieces to work simultaneously

- Many functions including Adjust mode, Preset mode and password function

- N2 iron (FX-8802) available as an option

- Đo dòng AC 400A

- Đo điện áp AC/DC 600V

- Đo điện trở lên đến 40 kΩ với khả năng phát hiện thông mạch

- Đo nhiệt độ và điện dung

Máy chụp ảnh nhiệt Fluke Ti450 với công nghệ lấy nét MultiSharp™ mang đến hình ảnh rõ nét, được lấy nét chính xác. Không cần lo lắng về lấy nét, chỉ cần ngắm và chụp.

- Đo điện áp AC/DC lên đến 1000 V

- Đo dòng điện AC/DC lên đến 10A (max 20A trong 30s)

- Đo điện trở lên đến 50 MΩ với khả năng phát hiện thông mạch

- Đo tần số, nhiệt độ và điện dung, ...

- Measuring function: Interference voltage and frequency, earthing resistance 3- and 4-pole with/without clip-on current transformer, resistance 2-pole with AC, 2- and 4-pole with DC

- Display: 4 digit - 7 segment liquid crystal display, with improved visibility

- Automatic Frequency Control (AFC) - identifies existing interference and chooses a measurement frequency to minimize its effect, providing more accurate earth ground value

- R* measurement - calculates earth ground impedance at 55 Hz to more accurately reflect the earth ground resistance that a fault-to earth ground would see

Bộ Data logger có khả năng ghi lại các giá trị điện áp, nhiệt độ, độ ẩm, xung và tín hiệu logic. Có khả năng mở rộng số kênh đo.

- Điện áp: 20 mV - 100 V , 1-5 V/F.S.

- Thermocouple: Type: K, J, E, T, R, S, B, N, và W (WRe5-26)

- Độ ẩm: 0 to 100% RH- Sử dụng sensor độ ẩm (option B-530)

Bộ Data logger có khả năng ghi lại các giá trị điện áp, nhiệt độ, độ ẩm, xung và tín hiệu logic. Có khả năng mở rộng số kênh đo.

- Điện áp: 20 mV - 100 V , 1-5 V/F.S.

- Thermocouple: Type: K, J, E, T, R, S, B, N, và W (WRe5-26), RTD

- Độ ẩm: 0 to 100% RH

Đồng hồ vạn năng

Hãng sản xuất: Kyoritsu

Model: 1020R

Xuất xứ: Nhật Bản

Bảo hành: 12 Tháng

Đồng hồ vạn năng

Hãng sản xuất: Kyoritsu

Model: 1061

Xuất xứ: Nhật Bản

Bảo hành: 12 Tháng

- 20 Hz to 300 kHz/500 kHz/1 MHz, with 4-digit resolution in any range

- 0.05% basic accuracy with superior measurement repeatability at low and high impedance

- 100 uV to 2 Vrms, 1 uA to 20 mA variable test signal

- DC bias 1.5/2 V

- Auto-level control

- DC resistance

- 201 points list sweep

- Versatile PC connectivity (LAN, USB, and GPIB)

- Frequency Upgradability

- 0.02 % basic accuracy, 1 μΩ max. resolution, 300 mA max. measurable current

- Measure from 0.000 mΩ (testing current 300 mA) to 3.5 MΩ

- Probe for guard jack use and increased measurement current yield an instrument that’s more resistant to noise

- Optional LED COMPARATOR ATTACHMENT and high-volume judgment tones combine to ensure PASS/FAIL judgments are communicated reliably in the noisy environment of the production floor

- EXT I/O interface with NPN/PNP support can accommodate a variety of automated production lines (-01 model)

- Three frequency options: 1 MHz to 500 MHz/1 GHz/3 GHz, upgradable

- ±0.65% basic accuracy and 120 mΩ to 52 kΩ impedance range (10% measurement accuracy range)

- Measurement parameters: |Z|, |Y|, θ, R, X, G, B, L, C, D, Q, |Γ|, Γx, Γy, θΓ, Vac, Iac, Vdc¹, Idc¹ (1. Option 001 is required)

- Built-in DC bias (Option 001): 0 V to ±40 V, 0 A to ±100 mA

- Improve power measurements with touch-driven dynamic views

- Measure voltage, current and power on 4 channels: DC, 1-phase AC or 3-phase AC

- Make more accurate power measurements: 0.05% at 50/60 Hz

- Measure current directly: internal shunts to 50 Arms, or with  external probes or transducers

- Address multiple test scenarios with isolated inputs

- High performance supplies ideal for benchtop and automated testing

- From basic benchtop applications to high speed systems, these medium-power supplies simplify testing and enhance measurement accuracy.

- Save space and increase flexibility with modular multiple-output and compact single-output supplies

- Simplify cabling with built-in measurements

- Streamline tasks with front panel control and advanced programmable features

- Ensure DUT safety with protection features

Digital storage, mixed signal and sampling oscilloscopes solve the toughest measurement challenges

- 1 GHz to 6 GHz, DSO or MSO models

- See more signal detail with 450,000 wfms/s update rate

- Isolate signals in seconds with exclusive Zone Touch Triggering

- Operate hands-free with multi-language voice control

- Get more functionality with optional integrated digital channels, serial protocol analysis, dual-channel WaveGen and 10-digit counter + 3-digit voltmeter

- Protect your investment with full upgradability; add options and bandwidth at any time

- Continuous testing of insulation (500/1000 V) and withstand voltage (100 VA transformer capacity)

- Full remote operation when used in combination with the Safety Test Data Management Software 9267

- Save up to 8 test settings each for the withstanding and insulation testing modes

- Precise test voltage without power voltage dependency is generated using the PWM method

- Continuous testing of insulation (500/1000 V) and withstand voltage (500 VA transformer capacity)

- Testing voltage: 0 to 2.5 kV / 0 to 5.0 kV AC, 2 range configuration 500 VA (30 minutes rated)

- Insulation to withstand series test or withstand to insulation series test at auto mode, or individual test at manual mode

- Save up to 10 test settings each for the withstanding and insulation testing modes

- External I/O, RS-232C interface, Status output (relay contacts)