HIOKI

- Earth resistance measurement for multi-grounded systems

- Measure leak current with absolute certainty with highly sensitive 0.01 mA resolution (at 20.00 mA range)

- Measure load current up to 60.0 A range

- Clamp at the narrowest point

- Top “primary supply level” safety class rating for voltage detectors

- CAT IV 1000 V design meets CE Mark qualifications

- Continuously indicate battery status with green indicator lamp

- Both visual and audible voltage detection indication

- Automatic power switching prevents battery discharge

- World’s first non-metallic contact voltage detection and testing

- Simply clip onto wire insulation

- Phase detection check and line-to-line voltage inspection at the same time

- Easy and intuitive phase detection check with backlight and buzzer

- Ideal for work certification photos, offering simultaneous display of phase sequence and 3-phase voltage

- Continuous testing of insulation (500/1000 V) and withstand voltage (100 VA transformer capacity)

- Full remote operation when used in combination with the Safety Test Data Management Software 9267

- Save up to 8 test settings each for the withstanding and insulation testing modes

- Precise test voltage without power voltage dependency is generated using the PWM method

Dòng sản phẩm đồng hộ vạn năng 3 1/2 Digit. Có độ chính xác cao, dải đo rộng với tất cả các tính năng cần thiết để thực hiện trong các ứng dụng đo điện phức tạp. 

- Đo điện áp DC: 600.000 mV ~ 1000.0 V, 5 ranges, Basic accuracy: ±0.3 % rdg. ±3 dgt.

- Đo điện áp AC: 6.000 V ~ 1000.0 V, 4 ranges, Frequency characteristics: 40 Hz - 1 kHz.  Basic accuracy 40 - 500 Hz : ±0.9 % rdg. ±3 dgt. (True RMS, crest factor 3)

Dòng sản phẩm đồng hộ vạn năng 4 1/2 Digit. Có độ chính xác cao, dải đo rộng với tất cả các tính năng cần thiết để thực hiện trong các ứng dụng đo điện phức tạp. 

- Đo điện áp DC: 60.000 mV ~ 1000.0 V, 6 ranges, Basic accuracy: ±0.025 % rdg. ±2 dgt.

- Đo điện áp AC: 60.000 mV ~ 1000.0 V, 6 ranges, Frequency characteristics: 20 Hz - 100 kHz.  Basic accuracy 45 - 65 Hz : ±0.2 % rdg. ±25 dgt. (True RMS, crest factor 3)

- Continuous testing of insulation (500/1000 V) and withstand voltage (500 VA transformer capacity)

- Testing voltage: 0 to 2.5 kV / 0 to 5.0 kV AC, 2 range configuration 500 VA (30 minutes rated)

- Insulation to withstand series test or withstand to insulation series test at auto mode, or individual test at manual mode

- Save up to 10 test settings each for the withstanding and insulation testing modes

- External I/O, RS-232C interface, Status output (relay contacts)

- Record data including voltage, current, power, harmonics, and flicker simultaneously along a single time axis

- Measure up to 6000 A AC

- Capture all power anomalies, including instantaneous outages, voltage drops, and frequency fluctuations, while simultaneously recording trend data

- Quick Set: Easy-to-understand on-screen guide for measurement procedures

- Bundled PQ ONE application software makes it easy to create reports

Hioki Memory HiCorders là thiết bị ghi và theo dõi dạng sóng với tốc độ cao có thể đo đồng thời nhiều hiện tượng thay đổi nhanh do các nhiễu, transient giữa các kênh và từ mỗi kênh xuống đất. MR8870 là thiết bị thu thập dữ liệu cầm tay (DAQ) được tích hợp sẵn với 2 kênh analog, phù hợp để bảo trì thang máy, thiết bị, động cơ và phân tích lỗi biến tần, kiểm tra và thử nghiệm

- 0.02 % basic accuracy, 1 μΩ max. resolution, 300 mA max. measurable current

- Measure from 0.000 mΩ (testing current 300 mA) to 3.5 MΩ

- Probe for guard jack use and increased measurement current yield an instrument that’s more resistant to noise

- Optional LED COMPARATOR ATTACHMENT and high-volume judgment tones combine to ensure PASS/FAIL judgments are communicated reliably in the noisy environment of the production floor

- EXT I/O interface with NPN/PNP support can accommodate a variety of automated production lines (-01 model)

- Compatible with LED lighting

- Complies with DIN 5032-7:1985 class B and JIS C 1609-1:2006 general AA class

- Timer hold function lets you make measurements in remote locations while avoiding the effects of shadows and reflections

- Save up to 99 measured values in the instrument’s internal memory and transfer them to a computer later for improved work efficiency

- Non-metallic contact for optimum safety

- Capture the voltage value of covered electric wires

- Also ideal for metallic busbars and terminals

- Optimized for 400 V AC circuits

- Three-electrode method, Two-electrode method (Simple Measurement)

- Wide measurement range for 0 to 1150 Ω, based on EN standard

- Switchable measurement frequency to reduce the effects of power supply harmonics

- Dramatically faster setup: Comes with improved grounding rods and cord winders.

- IP67 protected – top of the industry

- Test all ground types from Class A to Class D with a single meter

- Wide 0 to 2000Ω measurement range

- Minimize cabling time with innovative earthing rods and cable winder

- Pistol design with easy-to-see display

- A full menu of basic measuring functions

- Easily test in difficult locations, moving objects or where there is danger of electric shock